TABLE OF CONTENTS

• Step 1: Prepare a CSV file
• Step 2: Upload the file via Morek EV Tool App

In situations where the AC charger is being operated offline, adding large amounts of RFID cards one-by-one can become a tedious process.

Hence, this article will cover how to add them easily by creating a CSV file and uploading it via Morek EV Tool App.

The charger can hold 50 entries of either 4-byte (8 character) or 7-byte (14 character) length UIDs.

Step 1: Prepare a CSV file

For simplicity, please find the sample file at the bottom of the article.

Each RFID UID must be in a separate row. No header row or commas to separate the UIDs are needed:

Type in the necessary UIDs and transfer the file to the phone, which will be used to connect to the charger via Morek EV Tool App.

For more information on how to connect to the charger via Bluetooth, refer to the article Smart Charger Configuration guide.

Step 2: Upload the file via Morek EV Tool App

• Connect to the charger, scroll to the bottom of the configuration menu and tap ""Enter RFID Whitelist":

• Tap on "Add From File": 

• Navigate to the CSV file that was created in the previous step and select it:

• The file will be uploaded and the list of UIDs from the CSV file will be presented. Tap on "Add" to proceed:

• RFID UIDs that were in the CSV file will now be active and visible in the Local Whitelist:

If you encounter any issues, please make sure you are using the latest version of Morek EV Tool App. Otherwise, submit a ticket.