Requirements
Before you begin, ensure you have the following:
- Configuration access to the charger via Morek EV Tool
- Network connectivity for the charger.
If not please refer to our Morek EV Tool user manual
Integration Steps
1. Access the Charger with the Morek EV Tool
- How to do this you can learn in our Morek EV Tool user manual
2. Locate the OCPP Settings
- Navigate to the section where you can configure OCPP settings.
3. Configure the OCPP Server URL
- Set the OCPP server URL to
wss://ocpp.monta.app
4. Identify the serial number
"CP Name:" should by default be the serial number of the charger. Note down what it says in this field, as this is what you need to input in the serial number field when integrating to Monta.
5. Make sure that charger is in app mode.
Charge mode: APP
6. Save and Apply the Settings
Save the changes and apply the new settings. This step may involve restarting the charger to apply the new configuration.
7. Verify the connection
Once the configuration is applied, add the charger to Monta. If the integration fails because the charger is “offline”, please refer to the troubleshooting section.
Troubleshooting
If the charger fails to connect to the Monta OCPP server:
- Double-check the URL, Port, and Path: Ensure there are no typos in the URL ocpp.monta.app
- Network Issues: Verify that the charger has internet access and that no firewall is blocking the connection to the Monta server.
- Charger Logs: Check the charger’s diagnostics logs for any error messages that might provide clues about the connection issue.
- Firmware Update: Ensure that your charger's firmware is up to date. Sometimes, firmware updates include important fixes for connectivity issues.
- Serial number: Ensure the serial number matches what you’re inputting in Monta when integrating.
#2 Phone app integration
1. Create an account in Monta Charge
1.1. Click on Create new account
1.2. Select a method to sign in:
- Phone number
- Apple / Google / Microsoft account
- Read and accept the Terms & Conditions
- Click on I'm ready!
After creating your account, we encourage you to fill out your user profile with the relevant information, so you can use all Monta features to their full potential!
2. Add a charge point in Monta Charge
2.1. From the Get started screen select Add my home charge point.
2.2. Next select Add my charge point
2.3. Select the charger brand and model
2.4. Name the charge point and specify the address
2.5. Click on Continue
2.6. Select the OCPP integration option
2.7. Enter the serial number of the charger you noted down from the Morek EV Tool
2.8. Confirm the charge point information and click on Yes, pair charge point
Wait for verification and after that Your charge point is now connected and ready to charge!
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article